2PCOM

2PCOM HOME > Products

Thermal Resistance 0.1 (C/W), Noise Level 16dBA ~ 34dBA.
Vapor Chamber base design to let the heat average on the base.
8 heat pipes design to solve max. 200watt at 35C
Ultra high performance in air cooler.
Ultra Silent 120x120x25mm PWM fan.
6mm x 8 heat pipes design.
Very easy to be installed on main board.
User could install the second fan on the cooler.

	Model Name			PD1268U
	Dimensions(mm)			154(L) X 120(W) X 122(H)
	Weight			620g
	Bearing Type			N.D.B
	Rated Voltage			12 VCD
	Rate Current			0.32AMP(MAX)
	Air Flow			28~92(CFM)
	NoiseLevel			16~34dBA
	Speed (PWM)			500rpm~2300rpm
	Life			60,000hurs
	Thermal Resistance			0.1(C/W)

Heat conducts through the liquid saturated wick to a liquid-vapor interface located on top of the wick and from there it is removed via phase change. Evaporating menisci form on top of the wick at the evaporator of the VC and cause an increase in a capillary pressure. Also the evaporating menisci cause the vapor pressure to be higher at the evaporator than at the condenser. Due to a lower vapor pressure at the condenser, the vapor? flows from the evaporator to the condenser. The condensate is returned via capillary action back to the evaporator.

Wick structureGCu Powder High capillary pumping High heat flex density Work under any orientations, e.g, horizontal, gravity-aided and against gravity.

The wick serves as a pump, using capillary pressure to return the working fluid to the evaporator. The wick also acts to increase internal surface area to allow higher heat flux.